RC-500B
- Large area curing
RC-600
- High power large area curing
RC-700
- Modular system for cure area 3"x1"
RC-801,
802 - Modular systems for inline manufacturing; single and
dual lamp housings
RC-847
- Benchtop standalone system
Lamp
Housings
RC-250B
A portable, hand-held unit well suited for field repairs. It features
250 Watts and is a high intensity, pulsed system for spot curing
with one or two light guides. Cure area is up to 1" x 2.5".
High peak power gives fast cures through thick and pigmented adhesives.
Applications include fiber optic cable connections, plastic medical
tube sealing and PCB repairs.
Click on photo to view enlargement.
Back to Product List
RC-500
A large area, pulsed UV curing unit with coverage area of 1.5"
wide by 5" long which can be increased in 5 inch increments
in a production line setup. The unit can be operated for continuous
duty or "start, stop" curing. Unique to Xenon Corp.
this unit can be fitted with a linear or circular curing lamp.
Applications for the RC 500B include heat sensitive catheters
requiring 360° cures, cover coats and solder masks as well
as plastic coatings for various surfaces and containers
Click on photo to view enlargement.
Back to Product List
RC-600
Similar to the 500B, the RC 600 features twice the power of the
RC 500B and exposes a larger cure area [1" x 10"] with
the option of adding to cure area in 10" increments. As with
the RC 500B, the RC 600 is a high intensity, pulsed system. Applications
include marking paper, semiconductor hardbake, plastic IV and
other medical devices.
Click on photo to view enlargement.
Back to Product List
RC-700
Model RC-700 Curing System is a modular light source featuring
a lamp designed to provide high intensity, UV light in a small
optical area of 3" x 1". The unique serpentine lamp
design has a 10" arc length to maximize UV output for rapid
cures. In addition, model RC-700 provides many significant benefits
for demanding curing applications, such as a small light weight
lamp housing and system modularity for ease of integration and
process control. The complete system consists of a controller,
lamp housing assembly with lamp, auxiliary unit and cooling air
blower kit.
Click on photo to view enlargement.
Back to Product List
RC-801, RC-802 Designed for demanding inline process
applications, models RC-801 and RC-802 are modular systems offering
single lamp (RC-801) or dual lamp (RC-802) configurations for low
heat, fast throughput curing. To provide ease of integration, system
options include selection of lamp spectra, lamp pulse rates, light
blocking filter, power supplies and cable lengths. Instant ON/OFF
control of the pulsed UV lamp provides the means to operate the
lamp in either a continuous mode - 100% duty cycle - or in a burst
mode - duty cycle from 10% to 100%. Burst mode operation for start-stop-start
manufacturing results in reduced system energy requirements.
Click on photo to view enlargement.
Back to Product List
RC-847 For quick setup
and local operation, model RC-847 provides a standalone housing
that incorporates a controller, high voltage power supply and timer
unit with convenient front-panel operator controls. Also included
are circuit protection and AC power distribution wiring to run a
full system with lamp housings. The RC-847 may be configured with
high voltage power supply options: either 2300 joules/sec, or 3400
joules/sec. The RC-847 is also configurable with any of the lamp
housings listed below. Single or dual lamp configurations are available,
as well as the controller InterWeave™ operation.
Click on photo to view enlargement.
Back to Product List
Optional Lamp housings are available for the RC-801, RC-802 and
RC-847 curing systems. Consult factory for full information.
